Veritas Netbackup 8.0 comes with various improvements from the previous version, there are several new status codes present in this version. Here is the complete list of Netbackup status code for the version 8.0.
0 the requested operation was successfully completed
1 the requested operation was partially successful
2 none of the requested files were backed up
3 valid archive image produced, but no files deleted due to non-fatal problems
4 archive file removal failed
5 the restore failed to recover the requested files
6 the backup failed to back up the requested files
7 the archive failed to back up the requested files
8 unable to determine the status of rbak
9 a necessary extension package is not installed or not configured properly
10 allocation failed
11 system call failed
12 file open failed
13 file read failed
14 file write failed
15 file close failed
16 unimplemented feature
17 pipe open failed
18 pipe close failed
19 getservbyname failed
20 invalid command parameter
21 socket open failed
22 socket close failed
23 socket read failed
24 socket write failed
25 cannot connect on socket
26 client/server handshaking failed
27 child process killed by signal
28 failed trying to fork a process
29 failed trying to exec a command
30 cannot get passwd information
31 could not set user id for process
32 could not set group id for process
33 failed while trying to send mail
34 failed waiting for child process
35 cannot make required directory
36 failed trying to allocate memory
37 operation requested by an invalid server
38 could not get group information
39 client name mismatch
40 network connection broken
41 network connection timed out
42 network read failed
43 unexpected message received
44 network write failed
45 request attempted on a non reserved port
46 server not allowed access
47 host is unreachable
48 client hostname could not be found
49 client did not start
50 client process aborted
51 timed out waiting for database information
52 timed out waiting for media manager to mount volume
53 backup restore manager failed to read the file list
54 timed out connecting to client
55 permission denied by client during rcmd
56 client’s network is unreachable
57 client connection refused
58 can’t connect to client
59 access to the client was not allowed
60 client cannot read the mount table
63 process was killed by a signal
64 timed out waiting for the client backup to start
65 client timed out waiting for the continue message from the media manager
66 client backup failed to receive the CONTINUE BACKUP message
67 client backup failed to read the file list
68 client timed out waiting for the file list
69 invalid filelist specification
70 an entry in the filelist expanded to too many characters
71 none of the files in the file list exist
72 the client type is incorrect in the configuration database
73 bpstart_notify failed
74 client timed out waiting for bpstart_notify to complete
75 client timed out waiting for bpend_notify to complete
76 client timed out reading file
77 execution of the specified system command returned a nonzero status
78 afs/dfs command failed
79 unsupported image format for the requested database query
80 Media Manager device daemon (ltid) is not active
81 Media Manager volume daemon (vmd) is not active
82 media manager killed by signal
83 media open error
84 media write error
85 media read error
86 media position error
87 media close error
89 problems encountered during setup of shared memory
90 media manager received no data for backup image
91 fatal NB media database error
92 media manager detected image that was not in tar format
93 media manager found wrong tape in drive
94 cannot position to correct image
95 media id is not assigned to this host in the EMM database
96 unable to allocate new media for backup, storage unit has none available
97 requested media id is in use, cannot process request
98 error requesting media (tpreq)
99 NDMP backup failure
100 system error occurred while processing user command
101 failed opening mail pipe
102 failed closing mail pipe
103 error occurred during initialization, check configuration file
104 invalid file pathname
105 file pathname exceeds the maximum length allowed
106 invalid file pathname found, cannot process request
108 Action succeeded but auditing failed
109 invalid date specified
110 Cannot find the NetBackup configuration information
111 No entry was found in the server list
112 no files specified in the file list
114 unimplemented error code
116 VxSS authentication failed
117 VxSS access denied
118 VxSS authorization failed
120 cannot find configuration database record for requested NB database backup
121 no media is defined for the requested NB database backup
122 specified device path does not exist
123 specified disk path is not a directory
124 NB database backup failed, a path was not found or is inaccessible
125 a NetBackup catalog backup is in progress
126 NB database backup header is too large, too many paths specified
127 specified media or path does not contain a valid NB database backup header
128 NB database recovery failed, a process has encountered an exceptional condition
129 Disk storage unit is full
130 system error occurred
131 client is not validated to use the server
132 user is not validated to use the server from this client
133 invalid request
134 unable to process request because the server resources are busy
135 client is not validated to perform the requested operation
136 TIR info was pruned from the image file
140 user id was not superuser
141 file path specified is not absolute
142 file does not exist
143 invalid command protocol
144 invalid command usage
145 daemon is already running
146 cannot get a bound socket
147 required or specified copy was not found
148 daemon fork failed
149 master server request failed
150 termination requested by administrator
151 Backup Exec operation failed
152 required value not set
153 server is not the master server
154 storage unit characteristics mismatched to request
155 disk is full
156 snapshot error encountered
157 suspend requested by administrator
158 failed accessing daemon lock file
159 licensed use has been exceeded
160 authentication failed
161 Evaluation software has expired.
162 incorrect server platform for license
163 media block size changed prior resume
164 unable to mount media because it is in a DOWN, or otherwise not available
165 NB image database contains no image fragments for requested backup id/copy number
166 backups are not allowed to span media
167 cannot find requested volume pool in EMM database
168 cannot overwrite media, data on it is protected
169 media id is either expired or will exceed maximum mounts
170 third party copy backup failure
171 media id must be 6 or less characters
172 cannot read media header, may not be NetBackup media or is corrupted
173 cannot read backup header, media may be corrupted
174 media manager - system error occurred
175 not all requested files were restored
176 cannot perform specified media import operation
177 could not deassign media due to Media Manager error
178 media id is not in NetBackup volume pool
179 density is incorrect for the media id
180 tar was successful
181 tar received an invalid argument
182 tar received an invalid file name
183 tar received an invalid archive
184 tar had an unexpected error
185 tar did not find all the files to be restored
186 tar received no data
189 the server is not allowed to write to the client’s file systems
190 found no images or media matching the selection criteria
191 no images were successfully processed
192 VxSS authentication is required but not available
193 VxSS authentication is requested but not allowed
194 the maximum number of jobs per client is set to 0
195 client backup was not attempted
196 client backup was not attempted because backup window closed
197 the specified schedule does not exist in the specified policy
198 no active policies contain schedules of the requested type for this client
199 operation not allowed during this time period
200 scheduler found no backups due to run
201 handshaking failed with server backup restore manager
202 timed out connecting to server backup restore manager
203 server backup restore manager’s network is unreachable
204 connection refused by server backup restore manager
205 cannot connect to server backup restore manager
206 access to server backup restore manager denied
207 error obtaining date of last backup for client
209 error creating or getting message queue
210 error receiving information on message queue
212 error sending information on message queue
213 no storage units available for use
215 failed reading global config database information
216 failed reading retention database information
217 failed reading storage unit database information
218 failed reading policy database information
219 the required storage unit is unavailable
220 database system error
221 continue
222 done
223 an invalid entry was encountered
224 there was a conflicting specification
225 text exceeded allowed length
226 the entity already exists
227 no entity was found
228 unable to process request
229 events out of sequence - image inconsistency
230 the specified policy does not exist in the configuration database
231 schedule windows overlap
232 a protocol error has occurred
233 premature eof encountered
234 communication interrupted
235 inadequate buffer space
236 the specified client does not exist in an active policy within the configuration database
237 the specified schedule does not exist in an active policy in the configuration database
238 the database contains conflicting or erroneous entries
239 the specified client does not exist in the specified policy
240 no schedules of the correct type exist in this policy
241 the specified schedule is the wrong type for this request
242 operation would cause an illegal duplication
243 the client is not in the configuration
245 the specified policy is not of the correct client type
246 no active policies in the configuration database are of the correct client type
247 the specified policy is not active
248 there are no active policies in the configuration database
249 the file list is incomplete
250 the image was not created with TIR information
251 the tir information is zero length
252 An extended error status has been encountered, check detailed status
253 the catalog image .f file has been archived
254 server name not found in the NetBackup configuration
256 logic error encountered
257 failed to get job data
258 Vault duplication was aborted by administrator request
259 vault configuration file not found
260 failed to send signal
261 vault internal error 261
262 vault internal error 262
263 session id assignment failed
265 session id file is empty or corrupt
266 cannot find robot, vault, or profile in the vault configuration
267 cannot find the local host name
268 the vault session directory is either missing or inaccessible
269 no vault session id was found
270 unable to obtain process id, getpid failed
271 vault XML version mismatch
272 execution of a vault notify script failed
273 invalid job id
274 no profile was specified
275 a session is already running for this vault
276 invalid session id
277 unable to print reports
278 unable to collect pre eject information from the API
279 eject process is complete
280 there are no volumes to eject
281 vault core error
282 cannot connect to nbvault server
283 error(s) occurred during vault report generation
284 error(s) occurred during vault report distribution
285 unable to locate vault directory
286 vault internal error
287 vault eject failed
288 vault eject partially succeeded
289 cannot consolidate reports of sessions from container and slot-based vaults
290 one or more errors detected during eject processing
291 number of media has exceeded capacity of MAP; must perform manual eject using vltopmenu or vlteject
292 eject process failed to start
293 eject process has been aborted
294 vault catalog backup failed
295 eject process could not obtain information about the robot
296 process called but nothing to do
297 all volumes are not available to eject
298 the library is not ready to eject volumes
299 there is no available MAP for ejecting
300 vmchange eject verify not responding
301 vmchange api_eject command failed
302 error encountered trying backup of catalog (multiple tape catalog backup)
303 error encountered executing Media Manager command
304 specified profile not found
305 multiple profiles exist
306 vault duplication partially succeeded
307 eject process has already been run for the requested Vault session
308 no images duplicated
309 report requested without eject being run
310 Updating of Media Manager database failed
311 Iron Mountain Report is already created for this session
312 invalid container database entry
313 container does not exist in container database
314 container database truncate operation failed
315 failed appending to container database
316 container_id is not unique in container database
317 container database close operation failed
318 container database lock operation failed
319 container database open operation failed
320 the specified container is not empty
321 container cannot hold any media from the specified robot
322 cannot find vault in vault configuration file
323 cannot find robot in vault configuration file
324 invalid data found in retention map file for duplication
325 unable to find policy/schedule for image using retention mapping
326 specified file contains no valid entry
327 no media ejected for the specified vault session
328 invalid container id
329 invalid recall status
330 invalid database host
331 invalid container description
332 error getting information from EMM database
333 error getting information from media manager command line
334 unable to receive response from robot; robot not ready
335 failure occurred while suspending media for eject
336 failure occurred while updating session information
337 failure occurred while updating the eject.mstr file
338 vault eject timed out
339 vault configuration file format error
340 vault configuration tag not found
341 vault configuration serialization failed
342 cannot modify - stale view
343 robot already exists
344 vault already exists
345 profile already exists
346 duplicate MAP
347 vault configuration cache not initialized
348 specified report does not exist
349 incorrect catalog backup policy
350 incorrect vault catalog backup schedule
351 all configured vault steps failed
400 Server Group Type is Invalid
401 Server Group Already Exists
402 Server Group Already Exists with a different type
403 Server Group Active State is not valid
404 Server Group does not exist
405 Member’s server type not compatible with Server Group
406 The computer specified is not a member of the server group specified
407 Member’s NetBackup version not compatible with Server Group
408 Server Group is in use
409 Member already exists in server group
501 You are not authorized to use this application
502 No authorization entry exists in the auth.conf file for user name
503 Invalid username.
504 Incorrect password
505 Can not connect to the NB-Java authentication service on host on the configured port - (port_number).
506 connect to the NB-Java user service on host on port port_number.
507 Socket connection to the NB-Java user service has been broken
508 Can not write file.
509 Can not execute program
510 File already exists: file_name
511 NB-Java application server interface error
512 Internal error - a bad status packet was returned by NB-Java application server that did not contain an exit status code
513 bpjava-msvc: the client is not compatible with this server version (server_version).
514 NB-Java: bpjava-msvc is not compatible with this application version (application_version).
516 Could not recognize or initialize the requested locale - (locale_NB-Java_was_started_in).
517 Can not connect to the NB-Java user service via VNETD on host on port configured_port_number. If successfully logged in beforehand, retry your last operation. Check the log file for more details.
518 No ports available in range (port_number) through (port_number) per the NBJAVA_CLIENT_PORT_WINDOW configuration option.
519 Invalid NBJAVA_CLIENT_PORT_WINDOW configuration option value: (option_value).
520 Invalid value for NB-Java configuration option (option_name):(option_value).
521 NB-Java Configuration file (file_name) does not exist.
522 NB-Java Configuration file (file_name) is not readable due to the following error: (message).
523 NB-Java application server protocol error.
525 Cannot connect to the NB-Java authentication service via VNETD on (host) on port (vnetd_configured_port_number). Check the log file for more details.
526 bpjava authentication service connection failed
527 bpjava user service connection if connection to pbx on port 1556 fails
600 an exception condition occurred
601 unable to open listen socket
602 cannot set non blocking mode on the listen socket
603 cannot register handler for accepting new connections
604 no target storage unit specified for the new job
605 received error notification for the job
606 no robot on which the media can be read
607 no images were found to synthesize
608 storage unit query failed
609 reader failed
610 end point terminated with an error
611 no connection to reader
612 cannot send extents to bpsynth
613 cannot connect to read media server
614 cannot start reader on the media server
615 internal error 615. This error code is no longer used
616 internal error 616. This error code is no longer used
617 no drives available to start the reader process
618 internal error 618. This error code is no longer used
619 internal error 619. This error code is no longer used
620 internal error 620. This error code is no longer used
621 unable to connect to bpcoord
622 connection to the peer process does not exist
623 execution of a command in a forked process failed
624 unable to send a start command to a reader or a writer process on media server
625 data marshalling error
626 data un-marshalling error
627 unexpected message received from bpsynth
628 insufficient data received
629 no message was received from bptm
630 unexpected message was received from bptm
631 received an error from bptm request to suspend media
632 received an error from bptm request to un-suspend media
633 unable to listen and register service via vnetd
634 no drives available to start the writer process
635 unable to register handle with the reactor
636 read from input socket failed
637 write on output socket failed
638 invalid arguments specified
639 specified policy does not exist
640 specified schedule was not found
641 invalid media type specified in the storage unit
642 duplicate backup images were found
643 unexpected message received from bpcoord
644 extent directive contained an unknown media id. This error code is no longer used
645 unable to start the writer on the media server
646 unable to get the address of the local listen socket
647 validation of synthetic image failed
648 unable to send extent message to BPXM
649 unexpected message received from BPXM
650 unable to send extent message to bpcoord
651 unable to issue the database query for policy
652 unable to issue the database query for policy information
653 unable to send a message to bpccord. This error code is no longer used
654 internal error 654. This error code is no longer used
655 no target storage unit was specified via command line
656 unable to send start synth message to bpcoord. This error code is no longer used.
657 unable to accept connection from the reader
658 unable to accept connection from the writer
659 unable to send a message to the writer child process
660 a synthetic backup request for media resources failed
661 unable to send exit message to the BPXM reader
662 unknown image referenced in the synth context message from BPXM
663 image does not have a fragment map
664 zero extents in the synthetic image, cannot proceed
665 termination requested by bpcoord. This error code is no longer used
667 unable to open pipe between bpsynth and bpcoord. This error code is no longer used
668 pipe fgets call from bpcoord failed. This error code is no longer used
669 bpcoord startup validation failure. This error code is no longer used
670 send buffer is full
671 query for list of component images failed
800 resource request failed
801 JM internal error
802 JM internal protocol error
803 JM terminating
805 Invalid jobid
806 this mpx group is unjoinable
807 not externalized
811 failed to communicate with resource requester
812 failed to communicate with resource broker
813 duplicate reference string specified
818 retention level mismatch
819 unable to communicate with JM proxy
823 no BRMComm to join
830 drive(s) unavailable or down
831 image has been validated
832 failed to write discover data to a file
833 error parsing discovered XML data
900 retry nbrb request later
901 RB internal error
902 RB invalid argument
903 RB communication error
904 RB max reallocation tries exceeded
905 RB media server mismatch
906 RB operator denied mount request
907 RB user cancelled resource request
908 RB was reset
912 RB disk volume mount failed
913
914 RB media reservation not found
915 RB disk volume mount must retry
916 Resource request timed out
917 RB multiplexing group not found
918 RB does not have a multiplexing group that uses this media id or drive name
1000 Client is offline
1001 discovery document error
1002 Discovery detected a failed client
1057 A data corruption has been detected
1058 A data inconsistency has been detected and corrected automatically.
1401 Invalid arguments received
1402 Hold id or Hold name argument is invalid
1403 Backup id argument is invalid
1404 Image copy number argument is invalid
1405 No images are found
1406 Invalid hold type
1407 Invalid hold state
1408 Database error
1409 Unable to connect to database
1410 No data found
1411 Catalog error
1412 Hold record is being updated
1413 Requested hold is not found
1414 Duplicate hold found
1415 Duplicate image found
1416 Partially failed due to duplicate image
1417 Partially failed due to unhold image
1418 Requested image is not found
1419 Partially failed due to invalid image copy
1420 Cannot expire on hold image copy.
1421 Active holds cannot be changed
1422 Cannot deassign media on hold
1423 Unable to retrieve hold status of the image copies
1424 Requested Legal hold is not found
1425 Requested Local hold is not found
1426 Retired holds cannot be changed
1450 CORBA exception received from Indexing service.
1451 Invalid command line option
1452 Backup ID: does not exists
1453 Invalid Operation ID
1454 Invalid Priority
1455 Missing value for option <-option>
1456 Required option is not found
1457 Too many arguments provided
1458 Unable to connect to Indexing Service
1459 Incorrect file path:
1460 No data found in the file
1461 invalid date
1462 End date is before start date
1463 Hours must be greater than or equal to 1
1464 For -force option, operation ID has to be 1
1465 nbindexutil -list option is missing the -indexserver option
1466 Invalid combination of options
1467 Number of files is 0 and hence not submitting the request for backup image
1468 There are no tar copies for snapshot image
1500 Storage unit does not exist or can't be used where specified
1501 Source operation cannot be used where specified
1502 Retention type cannot be used where specified
1503 Volume pool does not exist or can't be used where specified
1504 Server group does not exist or can't be used where specified
1505 alternate read server does not exist or can't be used where specified
1506 data classification does not exist
1508 Storage lifecycle policy exceeds maximum copies
1509 Storage lifecycle policy exceeds maximum backup operations
1510 storage lifecycle policy cannot have more than one snapshot operation
1511 storage lifecycle policy must have at least one fixed retention or snapshot rotation operation
1512 storage lifecycle policy must have at least one backup, import, or snapshot operation
1513 invalid priority
1514 invalid operation type
1515 multiplexing value is not valid or cannot be used where specified
1516 all storage units or groups must be on the same media server
1517 Invalid retention level
1518 backup image is not supported by storage lifecycle policy
1519 Images are in process
1521 Database not available
1522 Error executing database query
1523 Invalid fragment
1524 Duplicate image record
1525 Invalid lsu
1526 Storage lifecycle policy exceeds maximum import operations
1527 storage lifecycle policy can have only one of backup, import, and snapshot operations
1528 The source copy for an Auto Image Replication is not capable of replication
1529 The source copy for Auto Image Replication must specify a storage unit
1530 Only one Auto Image Replication allowed per copy
1531 An import storage lifecycle policy requires one copy with remote retention type
1532 Import failed because the imported image specifies an SLP name which does not exist
1533 Import failed because the imported image data class is different than the SLP data class
1534 Import failed because the imported image specifies an SLP name with no import operation
1535 Import failed because the imported image backup id conflicts with an existing image
1536 The storage unit or storage unit group cannot be deleted because an SLP references it
1537 Backup policy and storage lifecycle policy have conflicting configurations
1538 Data classification in the SLP conflicts with backup policy
1539 Backup policy generates snapshots but storage lifecycle policy does not handle them
1540 SLP expects snapshots but backup policy does not create them with SLP management enabled
1541 Snapshot creation failed
1542 An existing snapshot is no longer valid and cannot be mounted for subsequent operations
1543 Policy type is not compatible with SLP operations
1545 Schedule type is not compatible with SLP operations
1546 Capacity managed retention type is not compatible with SLP operations
1547 Expire after copy retention requires a dependent copy
1548 Retention type is not compatible with snapshot operation
1549 TIR information selection is not compatible with SLP operations
1552 The source and target storage units are not valid replication partners
1553 Checkpoints are not allowed with SLP operations
1554 Storage unit snapshot capability is not compatible with operation characteristics
1556 The SLP deletion failed because a backup policy refers to it.
1557 Must specify mirror retention when target storage unit is mirror capable.
1558 Mirror retention is not allowed when target storage unit is not mirror capable.
1559 SLP referenced in policy or schedule not found
1560 Fixed or rotation retention required without a replication operation
1561 Policy using NDMP conflicts with multiple Backup From Snapshot operations in storage lifecycle policy
1562 Backup schedule generates snapshots but storage lifecycle policy does not handle them
1563 SLP expects snapshots but backup schedule does not create them
1565 Policy snapshot method is not compatible with SLP snapshot operations
1566 Storage unit required for snapshot operation when no other operation present
1567 Only one NDMP backup of a snapshot per backup ID is allowed
1568 Only one IndexFromSnapshot operation is allowed per storage lifecycle policy
1569 Snapshot storage unit is not configured for primary snapshots. It cannot be used in snapshot operation.
1570 Policy type does not support Index from Snapshot
1571 Data mover type specified in policy does not support Index from Snapshot
1572 Storage unit must be specified for this operation
1573 Backup image cannot be expired because its SLP processing is not yet complete
1800 Invalid client list
2000 Unable to allocate new media for backup, storage unit has none available.
2001 No drives are available for this job
2002 Invalid STU identifier type
2003 Drive is not allocated
2004 Drive is already allocated
2005 MDS has received an invalid message from a media server.
2006 NDMP credentials are not defined in EMM
2007 Storage unit is not compatible with requesting job
2008 All compatible drive paths are down
2009 All compatible drive paths are down but media is available
2010 Job type is invalid
2011 The media server reported a system error.
2012 Media has conflicts in EMM
2013 Error record insert failed
2014 Media is not assigned
2015 Media is expired
2016 Media is assigned to another server
2017 Media needs to be unmounted from a drive
2018 Number of cleanings is invalid
2019 Media is in a drive that is not configured on local system
2020 Robotic library is down on server
2021 Allocation record insert failed
2022 Allocation status record insert failed
2023 Allocation identifier is not known to EMM
2024 Allocation request update failed
2025 Allocation request delete failed
2026 Allocation status request delete failed
2027 Media server is not active
2028 Media is reserved
2029 EMM database is inconsistent
2030 Insufficient disk space or high water mark would be exceeded
2031 Media is not defined in EMM
2032 Media is in use according to EMM
2033 Media has been misplaced
2034 Retry the allocation request later
2035 Request needs to pend
2036 Drive is in a robotic library that is up
2037 Drive is not ready
2038 Media loaded in drive is not write-enabled
2039 SCSI reservation conflict detected
2040 Maximum job count has been reached for the storage unit
2041 Storage unit is down
2042 Density mismatch detected
2043 Requested slot is empty
2044 Media is assigned to another application
2045 Storage unit is disabled since max job count is less than 1
2046 Media is unmountable
2047 Media is write protected
2048 Media is in use by the ACS robotic library
2049 Media not found in the ACS robotic library
2050 ACS media has an unreadable external label
2051 ACS media is not in the drive's domain
2052 An ACS Library Storage Module (LSM) is offline
2053 Media is in an inaccessible drive
2054 Media is in a drive that is currently in a DOWN state
2055 ACS physical drive is not available
2056 The file name used for the mount request already exists
2057 The scan host of the drive is not active
2058 LTID needs to be restarted on media servers before the device can be used
2059 The robotic library is not available
2060 Media needs to be rewound or unmounted from a drive
2061 The host is not an active node of a cluster
2062 Throttled job count has been reached for the storage unit
2063 Server is not licensed for the Remote Client Option
2064 Job history indicates that no media is available
2065 Job history indicates that no drive is available
2066 Disk pool not found
2067 Disk volume not found
2068 Disk volume mount point not found
2069 Disk volume mount point record insert failed
2070 The specified mount path will not fit in the allocated space
2071 Unable to find any storage servers for the request
2072 Invalid operation on static mount point
2073 Disk pool is down
2074 Disk volume is down
2075 Fibre Transport resources are not available
2076 DSM returned an unexpected error
2077 DSM has already mounted the volume
2078 The maximum number of mounts for the disk volume have been exceeded
2079 DSM has detected that an invalid file system is mounted on the volume
2080 Disk volume has no max writers count
2081 Disk volume has no max readers count
2082 The drive needs to be marked as available
2083 The media affinity group is not defined in EMM
2084 Media affinity group record insert failed
2085 Disk volume is not available
2086 Disk volume cannot be used for more than one copy in the same job
2087 Media allocation would exceed maximum partially full media limit
2088 Cleaning media is not available
2089 FT client is not running
2090 FT client has no devices configured
2091 FT client devices are offline
2092 FT server devices for client are offline
2093 No FT servers for this client are running
2094 STU cannot run Lifecycle backups
2095 STU cannot run VMWare backup
2096 NDMP operation does not support multiple inline copies
2097 Storage Unit group does not exist in EMM configuration
2098 Media pool is not eligible for this job
2099 Required drive or drive path is not configured
2100 Maximum number of mounts has been exceeded for tape media
2101 Media server not found in EMM database
2102 Storage unit does not support spanning
2103 Media server mismatch
2104 Storage units are not available
2105 Storage unit requested for replication job is not replication capable
2106 Disk storage server is down
2107 Requested media server does not have credentials for storage server
2504 Direct expiration of a mirror copy is not allowed
2800 Standard policy restore error
2801 Oracle policy restore error
2802 Informix-On-BAR policy restore error
2803 Sybase policy restore error
2804 MS-SharePoint policy restore error
2805 MS-Windows policy restore error
2806 NetWare policy restore error
2807 SQL-BackTrack policy restore error
2808 Windows File System policy restore error
2809 MS-SQL-Server policy restore error
2810 MS-Exchange policy restore error
2811 SAP policy restore error
2812 DB2 policy restore error
2813 NDMP policy restore error
2814 FlashBackup policy restore error
2815 AFS policy restore error
2816 DataStore policy restore error
2817 FlashBackup Windows policy restore error
2818 NBU Catalog policy restore error
2819 Enterprise Vault policy restore error
2820 NBU VMware policy restore error
2826 Master server failed to connect to backup restore manager on media server for restore
2828 Restore failed because the MS-SQL-Server services are down
2829 Restore failed due to MS-SQL-Server database in use
2830 Restore failed due to an incorrect path in the MS-SQL-Server MOVE script
2831 Restore error
2832 Restore failed due to rename file format error
2833 Restore failed due to partition restore error
2834 Restore failed due to failure to read change block bitmap
2835 Restore failed due to corrupt image
2836 Restore failed because the bitmap size read from the image header differs from the expected size
2837 Restore failed due to invalid metadata
2838 Restore failed because no raw partitions were found
2839 Restore failed due to invalid raw partition ID
2840 Restore failed due to out of sequence raw partitions
2841 Restore failed due to failure to read the header from the backup image
2842 Restore failed due to failure to read the VMware bitmap
2843 Restore failed due to failure to start VxMS
2844 Restore failed due to failure to read the FIID file
2845 Restore failed due to failure to retrieve the bitmap
2846 Restore failed due to failure to retrieve the fsmap
2847 Restore failed due to failure to start the bptm writer
2848 Restore failed due to failure to create the virtual machine
2849 Restore failed due to failure to delete the virtual machine snapshot
2850 Restore error
4200 Operation failed: Unable to acquire snapshot lock
4201 Incorrect snapshot method configuration or snapshot method not compatible for protecting backup selection entries
4202 Invalid or incompatible storage unit configured
4203 Invalid or unsupported backup selection filelist
4204 Incompatible client found
4205 Incorrect or no credentials found
4206 Authentication error occurred. NetBackup Client Service is running as Local System, this is likely incorrect.
4207 Could not fetch snapshot metadata or state files
4208 Could not send snapshot metadata or statefiles
4209 Snapshot metadata or statefiles cannot be created
4210 Incorrect or no content found in snapshot metadata
4211 Snapshot not accessible or invalid snapshot
4212 Recreation of snapshot failed
4213 Snapshot import failed
4214 Snapshot mount failed
4215 Snapshot deletion failed
4216 Snapshot cleanup failed
4217 Snapshot restore failed
4218 Snapshot deport failed
4219 Command operation failed: Third-party command or API execution failed
4220 Command operation failed: System command or API execution failed
4221 Found an invalid or unsupported configuration
4222 Operation failed: Unable to acquire policy lock to take snapshot
4223 Operation not completed
4224 STS Internal Error
4225 Unauthorized operation attempted by client or media on storage server
4226 Communication failure occurred with storage server
4227 STS Plug-in error occurred
4228 Storage server or plug-in version mismatch
4229 Insufficient resources or capabilities found by storage server
4230 Invalid storage topology or storage server configuration error
4231 STS Unexpected Error
4232 Invalid Discovery Query URI
4233 BIOS UUID client reference not allowed for vCloud
4234 VMware server login failure
4235 vCloud keyword used when vCloud not enabled
4236 vCloud policy includes multiple organizations
4237 Client does not meet policy requirements
4238 No server credentials configured for policy
4239 Unable to find the virtual machine
4240 Operation not supported
4243 Unable to connect to the VirtualCenter server
4245 Invalid pathname for backup selection
4246 The requested operation was partially successful.
4247 Index from snapshot for Replication Director NDMP Policy is not supported on AIX media server
4248 Index from snapshot operation failed with an internal error
4249 Index from snapshot operation failed, catalog already exists
4250 Index from snapshot operation failed, unable to find child image or file information
4251 Index from snapshot operation failed. Failed to write into index database
4252 Index from snapshot operation failed. Entry does not belong to any of the backup selection entries.
4253 Index from snapshot operation failed. SLP version mismatch for current and previous backup image.
4254 Invalid or no path found to create index database
4255 Index from snapshot using SnapDiff is disabled by the user
4256 Index from snapshot is not supported for the file system associated with backup selection
4257 Index from snapshot is not supported for the storage server
4258 Transient error encountered while taking Hyper-V VM snapshot
4259 Failed to find VirtualCenter host name in VMware Lookup Service
4260 Encountered SSO login failure
4261 Encountered VMware Internal Server Error
4262 Encountered VMware vCloud Suite API failure
4263 Encountered VMware SOAP API failure
4264 Encountered unexpected error while processing TagView XML
4265 Encountered a VMware Virtual Machine Server that does not support Tags
4266 Encountered a VMware Virtual Machine Server that does not offer Tag APIs
4267 Failed to initialize Java Runtime Environment
4268 Failed to retrieve resource pool information
4269 Found multiple virtual machines with same identity
4270 A snapshot of the virtual machine exists and the policy option specifies aborting the backup
4271 Maximum virtual machine snapshots exceeded
4272 Maximum delta files exceeded
4273 Unable to lock the backup or restore host for virtual machine snapshot operations
4274 Failed to remove virtual machine snapshot
4275 Unable to consolidate Virtual Machine Disks
4276 Unable to retrieve Virtual Machine Disk information
4277 Virtual machine path contains unsupported characters
4278 Unable to retrieve virtual machine information
4279 Unable to retrieve virtual machine vCloud information
4280 Virtual machine contains independent and Raw Device Mapping disks only
4281 Virtual machine contains independent disks only
4282 Virtual machine contains Raw Device Mapping disks only
4283 Error detected while processing disk identifiers
4287 A NetBackup snapshot of the virtual machine exists and the policy option specifies aborting the backup
4290 Failed to create virtual machine snapshot. Virtual machine is busy performing another operation
5400 Backup error - None of the request objects were found in the database
5401 Backup error - FRA (Fast Recovery Area) was requested, but it was not found in the database
5402 OS Authentication error - Could not connect to the database. Please check the OS credentials
5403 Oracle Authentication error - Could not connect to the database. Please check the Oracle credentials
5404 ASM validation error - PROXY backup is not supported for ASM
5405 Recovery Catalog Authentication error - Could not connect to the Recovery Catalog. Please check the Recovery Catalog credentials
5406 Archive log only backup requested, but database is not in ARCHIVELOG Mode
5407 Database is in the wrong state (must be OPEN) for the requested action
5408 OS Authentication error - Could not find credentials. If this instance is part of an instance group, make sure that the group has the credentials that match this OS Type
5409 Cloning is NOT supported for this client platform
5410 Oracle Intelligent Policy is NOT supported for this client platform
5411 Cannot do a hot backup of a database in NOARCHIVELOG mode
5412 Database is in the wrong state (must be OPEN or MOUNTED) for an Archive Log Backup
5413 Database is in the wrong state (must be OPEN or MOUNTED) for an FRA backup
5414 The request operation is not supported with this client version
5415 Cannot shut down read-only standby database
5416 Oracle cannot resolve the TNS connection identifier
5417 An error has occurred checking if the NFS server is an appliance
5418 The NFS server is not an appliance
5419 The database backup share directory is not available on the appliance.
5420 Whole Database - Datafile Copy Share selection is not supported for this client platform.
5421 None of the requested pluggable databases were found.
5422 Partial success - one or more of the requested pluggable databases were not found.
5423 None of the requested tablespaces were found in the requested pluggable databases
5424 Partial success - one or more of the requested pluggable databases did not contain any of the requested tablespaces
5425 None of the requested data files were found in the requested pluggable databases
5426 Partial success - one or more of the requested pluggable databases did not contain any of the requested data files
5427 Partial success - more than one error was encountered, please refer to the Detailed Status tab in the Job Details and review logs for more information
5428 No database backup shares were found.
5429 No files that are related to the instance or database were found in the database backup share
5430 Database must be in ARCHIVELOG mode to perform a cold backup of a pluggable database
5500 The NetBackup core web service service internal error
5501 Supplied URI is too short
5502 Supplied URI is not supported
5503 NetBackup core web service is terminating
5504 Query string in URI is bad
5505 Client name is required
5506 Failed to communicate with core web service proxy
5507 Unknown jobid
5508 Error in parsing XML document
5761 Failed to initialize Windows Socket library
5762 Peer is not a NetBackup Master or Media Server
5763 Encountered error during socket communication
5764 Command specified for execution is invalid or not allowed
5765 Failed to execute specified command (CreateProcess or exec)
5766 Failed to execute specified command (fork)
5767 Failed to get exit code of child process
5768 Failed to read complete output of executed command
5769 Failed to reap exit code of child process
5770 Failed to get cluster configuration
5771 Failed to write output received from remote command
5772 Failed to read unified logging configuration file
5773 Failed to get virtual name of Master Server
5774 Specified logs are not valid
5775 Invalid option specified
5776 Failed to spawn new process
5777 Failed to create the staging directory on Master Server
5778 Failed to read Logging Assistant database
5779 Failed to lock Logging Assistant database
5780 Failed to set non-inherit flag on database file handle
5781 Failed to prepare to save Logging Assistant database
5782 Failed to start to write Logging Assistant database
5783 Failed to save Logging Assistant database
5784 Failed to access or write the readme or progress file
5786 Logging Assistant record does not exist
5787 Logging Assistant record already exists
5788 Debug logging has not been set up for Logging Assistant record
5789 Failed to interpret bpdbjobs output for job detail
5790 Failed to fetch PureDisk configuration setting from Windows registry
5794 Failed to calculate debug logs size for preview
5796 Logging Assistant agent encountered failure writing on socket to Master Server
5798 Failed to list disk volumes on Master Server using bpmount
5799 Failed to get disk space information of volumes or mount points
5800 Failed to execute bpdbjobs to fetch job details
5801 Failed to fetch job details. Check if job exists.
5803 Failed to modify PureDisk configuration file
5804 Failed to modify Java GUI configuration file (Debug.properties)
5805 Remote host NetBackup version not supported by the Logging Assistant
5806 Unexpected contents of PureDisk configuration file (pdregistry.cfg)
5807 Failed to copy nbcplogs/nbsu output file from remote host
5808 Failed to load PBX configuration to change log level
5809 Invalid PBX Debug Log Level specified
5811 Temporary directory to use for logs collection does not exist
5812 nbcplogs exited with error
5813 nbcplogs did not collect any logs
5814 nbsu exited with error
5815 No activity for the Logging Assistant record is in progress
5816 Collect debug logs operation canceled
5817 Collect nbsu operation canceled
5819 Cancel operation requested
5820 Not a valid Logging Assistant temporary directory for clean-up
5821 Failed to get policy details
5902 Fingerprint of the certificate could not be generated
5903 CA certificate could not be verified
5904 Internal error.
5905 The host ID is not valid
5906 The token is not valid
5907 Unknown resource requested
5908 Unknown error occurred
5909 Token does not exist for this token value
5910 Host name is not specifie
5913 A token with this name already exists
5914 The security service is not available
5915 Request timed out
5916 Token name is not specified
5917 The reissue token cannot have the usage count greater than one
5918 The maximum usage count for the token should be provided within the valid range, which is from 1 to 99999
5919 Validity period specified for this token is not valid. The maximum validity period that you can specify is 999 days
5920 The specified token is associated with a different host name
5921 The specified token is associated with a different host ID
5922 The reissue token cannot be associated with the host name
5925 The required data is missing
5926 Certificate signing request is not valid
5927 The specified file could not be opened.
5929 The certificate is not in the Active state, so it cannot be renewed
5930 The request could not be authorized
5931 The host ID is empty
5932 Token usage count is not set
5933 The maximum token usage limit has been reached
5934 The token has expired
5936 The specified token name is not in a valid forma
5938 The revocation reason code is not valid
5939 This revocation reason code is not supported by the server
5940 The specified token is not a reissue token
5941 The host ID is not associated with any host
5942 Certificate could not be read from the local certificate store
5943 Lock cannot be acquired on the file for writing
5944 The host alias list has multiple host names
5945 Host alias is not specified
5946 Token is mandatory
5947 The host is not registered with the server
5948 Certificate could not be written to the local certificate store
5949 Certificate does not exis
5950 Certificate already exists
5953 The certificate deployment level is not valid
5954 The host name could not be resolved to the requesting host's IP address
5955 The host name is not known to the master server
5956 The existing certificate deployment level on the master server does not allow this operation
5957 The master server is unable to connect to the CA.
5958 The master server is unable to access the CA certificate
5959 The NetBackup AT credentials of the web service user are not valid.
5960 NetBackup AT configuration on the master server could not be initialized
5962 The host name does not match the existing name in the certificate
5963 Entity does not exist
5964 Data conversion error
5965 The host ID associated with this reissue token is assigned to another host. You need to revoke the certificate for the host ID before you continue
5966 The host has an active certificate. You need to revoke the certificate before you can disassociate the host from its host ID
5967 The file already exists
5968 The host information could not be retrieved while creating the certificate signing request
5969 Response from the NetBackup Web Management Console service could not be parsed
5970 The server time could not be fetched
5971 The token contains characters that are not supported
6000 The provided path is not whitelisted
6530 Unable to start SharePoint web service on server
6531 Validation of operating system user/password failed for client
7610 Failed to parse the specified object
8000 User does not have permission(s) to perform the requested operation
8500 Connection with the web service was not established
8504 The web service certificate is issued by an unknown Certificate Authority
8505 The certificate is not yet valid
8506 The certificate has expired
8507 The certificate could not be verified
8508 List of trusted Certificate Authorities could not be fetched
8509 The specified server name was not found in the web service certificate
8510 Web server certificate verification failed
8700 The host database web service is unavailable due to an internal error
8701 The host does not exist
8702 The web service cannot create the host because the host exists in the host database
8703 The web service cannot create the host because the alias name exists in the host database
8704 A conflict occurred while updating the host database. Kindly retry the operation
8706 The required field is missing from the input request
8707 The web service cannot update the host ID.
8708 Constraint violations are detected for the given attributes in the input request
8709 The destination file or directory already exists
8710 The disk space is insufficient on the host to upload
8711 The folder that is required to upload the telemetry data does not exist
8712 Failed to upload the file
8713 Failed to upload the file. The input file cannot be empty
8800 Communication with EMM failed-option>
Source : veritas.com
Thanks for reading Veritas Netbackup 8.0 Status Code. Please share...!
0 Komentar untuk "Veritas Netbackup 8.0 Status Code"